Stable All‐Green‐Solvent Processed Inverted Perovskite Solar Cells
Saikiran. S. Khamgaonkar,
Nayla Qureshi,
Mahdi Hasanzadeh Azar,
Yenal Yalcinkaya,
Kevin P. Musselman,
Lukas Schmidt‐Mende,
Vivek Maheshwari Advanced Functional Materials
· Wiley
· 2026-11-18
· DOI: 10.1002/adfm.79681
Аннотация
ABSTRACT Environmentally sustainable processing of perovskite solar cells (PSCs) requires green solvent systems that can simultaneously produce high‐quality perovskite thin films with high efficiency and long‐term stability. Here, we report a cosolvent strategy combining two green solvents, γ‐valerolactone and dimethyl sulfoxide, to regulate the crystallization kinetics and to fabricate high‐quality perovskite thin films. We further modulate the perovskite crystallization and passivate defects by introducing a poly(4‐fluorostyrene) polymer additive. The addition of the polymer leads to strong interactions with the perovskite precursors, resulting in larger grains, reduced trap density, and suppressed ion migration. The synergistic combination of green cosolvent engineering and polymer passivation yields all‐green‐solvent PSCs with power conversion efficiencies of up to 19.1%, excellent reproducibility, and negligible hysteresis. More importantly, the improved film quality and defect passivation impart exceptional thermal and operational stability. Temperature‐dependent X‐ray diffraction reveals that PS‐F significantly delays thermally induced phase degradation. Consequently, the PS‐F‐passivated green‐solvent devices retain 98% of their initial efficiency after 1000 h under ISOS‐D2 thermal aging. Furthermore, suppressed ion migration and reduced dark current enable outstanding operational stability, with devices maintaining 96% of their initial efficiency after 2000 h of continuous maximum power point tracking under ISOS‐L1 conditions.
Saikiran. S. Khamgaonkar, Nayla Qureshi, Mahdi Hasanzadeh Azar, Yenal Yalcinkaya, Kevin P. Musselman, Lukas Schmidt‐Mende et al. Stable All‐Green‐Solvent Processed Inverted Perovskite Solar Cells. // Advanced Functional Materials. – 2026. – DOI: 10.1002/adfm.79681. – URL: https://advanced.onlinelibrary.wiley.com/doi/10.1002/adfm.79681?af=R
Saikiran. S. Khamgaonkar, Nayla Qureshi, Mahdi Hasanzadeh Azar, Yenal Yalcinkaya, Kevin P. Musselman, Lukas Schmidt‐Mende, & Vivek Maheshwari (2026). Stable All‐Green‐Solvent Processed Inverted Perovskite Solar Cells. Advanced Functional Materials. https://doi.org/10.1002/adfm.79681
Saikiran. S. Khamgaonkar, et al. “Stable All‐Green‐Solvent Processed Inverted Perovskite Solar Cells.” Advanced Functional Materials, 2026. doi:10.1002/adfm.79681.
@article{Khamgaonkar2026,
title = {Stable All‐Green‐Solvent Processed Inverted Perovskite Solar Cells},
author = {Khamgaonkar, Saikiran. S. and Qureshi, Nayla and Azar, Mahdi Hasanzadeh and Yalcinkaya, Yenal and Musselman, Kevin P. and Schmidt‐Mende, Lukas and Maheshwari, Vivek},
journal = {Advanced Functional Materials},
year = {2026},
doi = {10.1002/adfm.79681},
url = {https://advanced.onlinelibrary.wiley.com/doi/10.1002/adfm.79681?af=R}
}
ABSTRACT Polyurethane hot‐melt adhesives (PU‐HMAs) are widely used, yet face a long‐standing trade‐off between low viscosity required for effective interfacial establishment and high crosslink density necessary for mechanical robustness...
ABSTRACT Defects at the surfaces and grain boundaries of perovskite films seriously restrict the power conversion efficiency (PCE) and stability of perovskite solar cells (PSCs). While post‐treatment with organic cations is widely...
ABSTRACT A fundamental challenge in bioelectronics is to create an electrical bioadhesive interface that forms spontaneously, adheres robustly, and integrates seamlessly with dynamic tissues. While in‐situ hydrogels offer a potential...