Materialwissenschaft und Werkstofftechnik
Publisher: Wiley · ISSN 09335137 · 15 articles
-
Top‐ and bottom‐of‐the‐line corrosion: Effects of 30 °C bottom liquid and 20 °C steel temperature in CO 2 and H 2 S/N 2 environments
Corrosion in oil and gas pipelines is strongly influenced by environmental chemistry and pipeline location, affecting reliability and safety. This study examines the corrosion behavior of API 5L X65 carbon steel under top (TLC) and...
-
Atomic layer and digital etching: Correlation between interface quality and device stability of recessed‐gate gallium nitride transistors with aluminum nitride/hafnium oxide
This work presents a comparative study of two advanced recessing processes—atomic layer etching (ALE) and digital etching (DE)—for aluminum nitride/hafnium oxide (AlN/HfO 2 ) aluminum gallium nitride/gallium nitride (AlGaN/GaN)...
-
Synthesis of eggshell‐based hydroxyapatite with trisodium citrate chelating agent
Hydroxyapatite is a calcium phosphate ceramic similar to the mineral phase of bone and teeth, is widely used in biomedical implants due to its excellent biocompatibility. This study synthesizes hydroxyapatite from eggshell waste using...
-
Influence of nickel and molybdenum disulfide additives on the microstructure and tribological performance of FeCrMoCB amorphous coatings fabricated by laser cladding
The longevity and performance of industrial components are frequently compromised by surface wear, especially in high‐stress applications. This study explores the enhancement of Fe‐based coatings through the incorporation of nickel (Ni)...
-
Analysis of Ming and Qing museum ceramic artifact's provenance through scientific techniques with similarities in statistical approach
The museum of asian art (MoAA), universiti Malaya has a collection of porcelain sherds. For some of them, it can be difficult to determine age, provenance, and authenticity. In this study, we have made efforts to characterize these...
-
Porous polymeric nanocomposites for biomedical applications
Date seed, and bullock pod nanoparticles with up to 1 wt.% were used as reinforcement in polypropylene to develop biomedical materials. Microstructural, mechanical and antimicrobial tests were conducted. The maximum compressive strength...
-
Silane coupling agent for semiconductor manufacturing
Silane coupling agents (SCAs) have evolved from conventional adhesion promoters into multifunctional interfacial materials essential for semiconductor packaging reliability. As device miniaturization, heterogeneous integration, and...
-
Fabrication of kenaf‐derived nanocellulose carriers via adsorption and encapsulation techniques for chemical and biological pesticide delivery
This study investigates the fabrication of sustainable pesticide delivery systems using kenaf‐derived cellulose nanofiber as a green nanocarrier through two formulation approaches; physical adsorption and encapsulation. For chemical...
-
Top‐of‐line corrosion in marginal sour environment: protectiveness of iron (II) sulphide in wet gas pipeline
Pipeline integrity remains challenged by limited understanding of top‐of‐line corrosion (TLC) in marginal sour environments, where mitigation strategies cannot be directly inferred from sweet or highly sour systems. Hence, this study...
-
Corrosion behaviour of friction stir welded dissimilar magnesium alloys ZE41 and AZ31
This study investigates the influence of tool rotational speed and feed rate on the corrosion behaviour of ZE41‐AZ31 friction stir welded (FSW) dissimilar joints using immersion testing, open circuit potential (OCP), electrochemical...
- Cover Picture: (Materialwiss. Werkstofftech. 9/2026)
-
Multi–criteria optimization of cutting parameters during dry computer numerical controlled milling of martensitic stainless steels 410 and 420 using grey relational analysis
This study optimized cutting parameters for dry computer numerical control milling of martensitic stainless steels (410/420) using grey relational analysis and identified the optimal parameters as a spindle speed of 1500 min −1 , a...
-
Processing conditions, structural evolution, and mechanical properties of Fe–28Al, prepared by two‐step sintering technology
Two technological modes for the production of Fe‐Al intermetallics were used: pressureless vacuum sintering of samples consolidated from a mixture of elementary powders or the mode including pre‐sintering of consolidated samples at 1050...
-
Effect of gadolinium on microstructure characteristics and strengthening mechanisms of Mg(‐Gd)‐Nd‐Zn‐Zr alloys by hot treatment
In this study, a quantitative analysis was performed to assess the respective contributions of gadolinium (Gd) addition and heat treatment to the strengthening of the Mg–3Nd–1Zn–0.5Zr alloy. The results indicate that gadolinium addition...
-
Essential work of fracture and absorbed energy by Charpy impact test of TRIP780 1.5 mm thick sheet steel
Transformation‐induced plasticity (TRIP) steels have been extensively studied concerning their mechanical performance under monotonic loading and conventional microstructural characterization. However, despite their pivotal role in...