Strategic Integration of FAPbI3 and FASnI3 in a Dual‐Absorber Perovskite Solar Cell Architecture for Enhanced Spectral Utilization and Photovoltaic Performance
Abstract
ABSTRACT Over the past decade, perovskite solar cells (PSCs) have gained significant attention as promising photovoltaic devices due to their high efficiency and simple fabrication process. Nevertheless, operational stability and the interface loss still constitute critical challenges to achieving practical implementation of these cells on a large scale. Therefore, this study focuses on investigating the behavior of a novel tandem‐like mixed perovskite‐based heterojunction solar cell with the device configuration FTO (TCO)/TiO 2 (ETL)/FAPbI 3 /FASnI 3 /Spiro‐OMeTAD (HTL)/Gold (Au) using SCAPS‐1D. The combination of FAPbI 3 and FASnI 3 perovskites leads to a higher compatibility of bands and effective carrier separation and recombination compared to traditional solar cells. Some device parameters for instance thickness of absorber layer, bulk defect density, carrier density and other parameters that affect interface losses have been optimized to get the highest performance of this solar cell. Internal resistances, device temperature and back‐contact work function have been considered to check the influence of these factors on the device output and durability of the solar cell. As a result, the optimized device exhibited short‐circuit current density (J SC ), open‐circuit voltage (V OC ), fill factor (FF), and power conversion efficiency (PCE) values of 31.42 mA/cm 2 , 1.20 V, 85.80%, and 32.44%, respectively. The obtained results can serve as a useful guideline for improving the efficiency and stability of next‐generation PSCs.