Journal of Applied Polymer Science
Publisher: Wiley · ISSN 00218995 · 15 articles
- Editorial Board, Aims & Scope, Table of Contents
-
Segregated Actuator Based on Micro‐Foamed Films Featuring Beneficial Load‐Bearing Capacity and Electromagnetic Interference Shielding Performance
ABSTRACT Soft actuators serve as essential functional units for intelligent flexible equipment and extreme‐environment actuating devices. Traditional dense‐film actuators suffer from heavy weight and poor radiation stability, which...
-
Room‐Temperature Cure Acceleration of Commercial Bio‐Based Epoxy Resins Using a Zinc Chloride–Ethanol Accelerator: Epoxide Conversion and Mechanical Performance
ABSTRACT Bio‐based epoxy resins face limited industrial adoption due to prolonged room‐temperature curing times. To overcome this, a zinc chloride–ethanol accelerator solution (ZnET; ≈0.43 wt% ZnCl 2 and ≈0.57 wt% ethanol) was added at...
-
Small Molecule and Oligomeric Phenylated Polyphenylene With Ethynyl, Phenylethynyl, and Perfluorophenylethynyl End‐Cap Resins: Synthesis and Characterization of Thermal Properties
ABSTRACT This work introduces a novel class of melt‐processable polyarylene resins, including the first demonstration of perfluorophenylethynyl end‐capping, which successfully decouples low‐temperature melting from high‐temperature...
-
Cardanol‐Based Non‐Isocyanate Polyurethane Coatings: Synthesis and Characterization
ABSTRACT This study focuses on developing non‐isocyanate polyurethane (NIPU) coatings to mitigate the environmental issues associated with conventional isocyanate‐based coatings. Utilizing the nucleophilic addition reaction between...
-
Glycidyl Methacrylate‐Mediated Network Formation in Bio‐Based Styrene–Acrylate/Epoxidized Soybean Oil Latex for Balanced Coating Performance
ABSTRACT A bio‐based waterborne styrene–acrylate/epoxidized soybean oil (SA/ESO) latex was developed by directly incorporating unmodified ESO into a glycidyl methacrylate (GMA)‐functionalized acrylic matrix and curing with isophorone...
-
Investigation of the Mechanical, Thermal, and Morphological Properties of Polypropylene Composites Reinforced With Carbon Fiber Powder and Rare Earth Oxide Additives
ABSTRACT In this study, composite materials obtained by blending low‐density polyethylene (LDPE)‐based filler materials containing carbon fiber powder (CFP) and rare earth oxides (REO) with polypropylene (PP) in various ratios were...
-
Cavitation and Abrasion Resistance by Tuning the Strength and Toughness of Polyurethane
ABSTRACT Polyurethane elastomers (PUEs) with systematically varied hard‐segment content and cross‐linking density were developed to investigate the relationship between mechanical balance and damage mechanisms under harsh service...
-
Development, Characterization, and pH ‐Responsive Properties of Starch‐Pectin Biodegradable Films Incorporated With Annatto and Beetroot Extracts
ABSTRACT In this study, biodegradable starch–pectin films were developed using the casting technique and characterized to investigate the effects of incorporating natural annatto and beetroot extracts on their physicochemical,...
-
Salt‐Induced Micellization and Disulfide‐Mediated Modulation of Elastin‐Like Polypeptide Block Copolymers
ABSTRACT Understanding the self‐assembly and environmental responsiveness of block copolymers in aqueous environments is essential for designing smart macromolecular materials. Biologically synthesized polymers have attracted increasing...
-
Study on the Multi‐Environment Anti‐Aging Performance of Nano‐Textured PTFE – Al 2 O 3 Hybrid FKM Composites
ABSTRACT Fluoroelastomer (FKM) is widely used in aerospace sealing but suffers from synergistic degradation caused by thermal oxidative aging, low temperature embrittlement, salt spray corrosion, and oil swelling. In this study,...
-
Interfacial Improvement of Hollow Glass Microspheres Toward Lightweight Rubber Composites for Potential Footwear Applications
ABSTRACT Hollow glass microspheres (HGMs), characterized by their unique hollow structure and low density, present significant potential for enhancing the lightweight properties of polymers, particularly in footwear applications....
-
Self‐Healing Gel Polymer Electrolytes Enabled by Diels–Alder Chemistry for High‐Performance Lithium Metal Batteries
ABSTRACT Gel polymer electrolytes (GPEs), consisting of a polymer host swollen with liquid electrolyte, are being employed to address the safety concerns. This study presents a series of Diels–Alder (DA) GPEs for lithium (Li) metal...
-
Comparison of Thioether‐ and Oxyether‐Containing Polyimide Films as Integrated Insulating‐Adhesive Layers for High‐Frequency Two‐Layer Flexible Copper Clad Laminates
ABSTRACT To develop integrated insulating and adhesive films for two‐layer flexible copper‐clad laminates (2L‐FCCLs), two series of polyimide (PI) films containing thioether (PI‐S) or oxyether (PI‐O) linkages are prepared via a...
-
Regulation of Two‐Stage Cyclization Reaction and Thermal Stabilization Properties of Polyacrylonitrile Copolymers by N ‐Methylol Acrylamide
ABSTRACT Conventional polyacrylonitrile (PAN) homopolymer precursors suffer from concentrated exothermic release, poor thermal stability, and stress accumulation during thermal stabilization, which hinders the fabrication of...