Journal of Bio- and Tribo-Corrosion Металлы и сплавы
Evaluation of the Microstructural, Mechanical, Tribological, and Corrosion Properties of Zinc-Based Composites Reinforced Silica Beach Sand Particulates
Аннотация
Abstract In this study, the characterization of mechanical, tribological, and corrosion behavior of silica sand-reinforced zinc (Zn) alloy composites was carried out. The zinc alloy matrix composites were developed at 0- and 10-wt% SiO 2 sand particulates reinforcement using stir-casting technique. Microstructural examination, mechanical, tribological, and corrosion behavior evaluation of the composites were conducted using scanning electron microscope/optical microscope, nanoindentation test, tribometer device, and potentiodynamic tester, respectively. Results obtained from the microstructural analysis revealed that the SiO 2 particulates were well dispersed into the zinc-based alloy matrix. The addition of SiO 2 sand particles into the Zn alloy matrix improved its hardness and elastic modulus by approximately 48.4% and 16.2%, respectively. Additionally, the wear test and corrosion test revealed that the wear rate and corrosion rate of the composites decreased with the SiO 2 sand particles incorporation, which indicates SiO 2 sand reinforcement efficiency on improving the wear resistance and corrosion resistance of the Zn-based alloy materials and a guide for a better control of their wear and corrosion. These findings suggest the potential usability of SiO 2 sand particle-reinforced Zn-based alloy composite materials for specific mechanical load-bearing, friction, and corrosion control applications.