Phthalic anhydride–modified EPDM/NBR blends: enhancement of mechanical properties, morphology, and potential engineering application

Acta Neurochirurgica · Springer Nature · 2026-10-21 · DOI: 10.1007/s42464-026-00409-7

Аннотация

This work investigates the preparation and characterisation of elastomeric composites based on ethylene-propylene-diene monomer (EPDM) and nitrile butadiene rubber (NBR), modified with phthalic anhydride in different ratios (0, 2, 4, 6, 8, and 10 phr). The introduction of phthalic anhydride was aimed at improving the compatibility between the nonpolar EPDM and the polar NBR phases, thereby enhancing the overall performance of the materials. The obtained results demonstrated that low to moderate amounts of phthalic anhydride contributed to a noticeable increase in tensile strength, hardness, and tear resistance, which can be attributed to improved interfacial adhesion and more efficient crosslinking. At the same time, thermal stability and resistance to aggressive oil–fuel media were positively affected, especially at 4–6 phr concentrations. However, at higher loadings (8–10 phr), a decline in elongation at break and elasticity was observed, indicating a partial loss of flexibility within the elastomeric network. These findings suggest that an optimal amount of phthalic anhydride can provide a balanced improvement of mechanical and physicochemical characteristics. The developed EPDM/NBR–phthalic anhydride composites show strong potential for applications in the automotive industry, particularly for seals, gaskets, and hoses operating under thermal, oxidative, and chemical stresses.

Читать у издателя →

Похожие статьи