Vadose Zone Journal Почвоведение
Integrating hydrogeological modeling and time‐lapse electrical resistivity tomography to monitor water infiltration in a mine waste cover system
Аннотация
Abstract Tailings storage facilities can raise environmental concerns through the generation of contaminated drainage when tailings come into contact with rainwater and oxygen. Inclined multilayer cover systems such as covers with capillary barrier effects (CCBEs) are widely used to limit infiltration, and monitoring their in situ performance is essential. Time‐lapse electrical resistivity tomography (TL‐ERT) has emerged as a promising, noninvasive technique to track water movement within these systems. However, interpreting TL‐ERT data relies on inversion algorithms and petrophysical relationships, both of which introduce uncertainty, especially in thin, multilayered covers with strong electrical resistivity contrasts. This study presents an alternative approach for interpreting TL‐ERT data without conventional inversion. A calibrated hydrogeological model of the multilayer cover system is used to generate synthetic ERT datasets that are directly compared with ERT field measurements, which makes it possible to mimic the infiltration of water during a controlled infiltration test. The ERT dataset consists of 63 images acquired along a 32‐m profile with 64 electrodes spaced 0.5‐m apart, installed on a 1‐m‐thick inclined CCBE, which was monitored for 8 days. Comparison with conventional ERT inversions indicates that the hydrogeological model provides a more reliable representation of water movement within the cover system during the infiltration test, and a better understanding of the in situ behavior of the cover system. The results pave the way for the potential calibration of hydrogeological models designed to assess the efficiency of reclamation covers that aim to reduce water infiltration, using geophysical data as an additional constraint.