Influence of hollow specimen geometry and high-pressure hydrogen on tensile properties for AISI 304 stainless steel
Аннотация
Tensile tests using hollow specimens filled with high-pressure hydrogen enable measurement of tensile properties over a wide range of pressures and temperatures, but possible geometry effects are not fully understood. This study investigates hydrogen embrittlement in hollow tensile specimens of stainless steel AISI 304 with constant gauge length and varying inner and outer diameters. Slow strain rate tests were performed in hydrogen and, for reference, in nitrogen, with three tests per geometry. Specimens were mainly manufactured by deep hole drilling, with one batch by conventional HSS drilling to assess machining effects. Electron backscatter diffraction and surface roughness measurements were used to characterize the inner surface. The tensile properties show only a slight dependence on the ratio of inner to outer diameter, within the range of experimental scatter, for normal specimen sized specimens, meaning neither using sub-sized nor oversized geometries. This dependence could only be resolved through repetitive testing. A mechanism based on crack initiation is proposed. Finally, recommendations for preferred geometry for reliable testing are given. Graphical abstract