Solar RRL Electrical and Electronic Engineering

Ammonium Versus Amidinium: Linking Additive Volatility to Phase Stability in FAPbI 3 Perovskites

Tehila Wallach, Tal Binyamin, Yoav Avram, Tzipora Ben Zvi, Ben Aizenshtein, Elad Gross, Lioz Etgar
Wiley · 2026-11-16 · DOI 10.1002/solr.70543

Abstract

Although formamidinium lead iodide (FAPbI 3 ) is considered a very attractive perovskite, its practical application is hindered by poor phase stability under humid conditions. Employing stabilizing additives is a common method to solve this issue. In this study, the role of the additive functional group is investigated by using propyl ammonium (C 3 H 10 N + , P‐ammonium) and propionamidinium (C 3 H 9 N 2 + , P‐amidinium); while both contain a propyl backbone, they differ in the functional group. The active FAPbI 3 phase was successfully formed with both additives, confirmed by absorbance, photoluminescence, and X‐ray diffraction. The resulting solar cells exhibited comparable power conversion efficiencies of 16.5% (P‐amidinium) and 16.8% (P‐ammonium), with other photovoltaic and electronic parameters remaining very similar; however, FAPbI 3 with P‐ammonium degrades to the yellow inactive phase significantly faster than P‐amidinium‐based FAPbI 3 , resulting in poorer device stability. The better stabilization of FAPbI 3 with P‐amidinium is attributed to its retention within the postannealed film, whereas P‐ammonium leaves the film during the annealing, as indicated by H nuclear magnetic resonance and infrared reflection absorption spectroscopy. These findings emphasize the critical role of additive volatility and functional group chemistry for FAPbI 3 solar cell stabilization.

Read at publisher →