Chromate‐Conversion‐Induced Cr <sub>2</sub> O <sub>3</sub> ‐Rich Interphase for Dendrite‐Free and Highly Reversible Zinc Metal Anodes
Abstract
ABSTRACT Aqueous zinc batteries hold great promise for large‐scale energy storage, yet their practical application is hindered by dendrite growth and interfacial side reactions on the zinc anode. Inspired by the industrially mature chromate passivation technology, this work reports an in situ construction of a chromium‐rich passivation layer (Zn@Cr) on zinc metal via a liquid‐solid interface reaction between zinc foil and sodium chromate solution. Systematic characterization reveals that the passivation layer is composed of crystalline Cr 2 O 3 with a dense and uniform structure. Electrochemical tests demonstrate that the optimized Zn@Cr‐2 anode enables over 1400 h of stable cycling in symmetric cells (1 mA cm −2 , 1 mAh cm −2 ) and achieves an average Coulombic efficiency of 99.37% in Zn‖Cu half‐cells. When coupled with a MnO 2 cathode, the Zn@Cr‐2||MnO 2 full cell delivers an initial capacity of 218.8 mAh g −1 at 1 A g −1 and retains 179.1 mAh g −1 after 950 cycles, exhibiting excellent rate capability and long‐term cycling stability. Further mechanistic analysis reveals that the chromium‐rich layer functions both as an “interfacial shield” and a “deposition guide”: it suppresses hydrogen evolution and corrosion side reactions while inducing preferential Zn deposition along the (002) plane, thereby enabling uniform and dense zinc nucleation and growth. This study extends conventional metal surface treatment technology to the protection of battery anodes, offering a new strategy for interfacial design in high‐performance aqueous zinc batteries that combines industrial feasibility with academic significance.