Macromolecular Symposia Materials Chemistry
Comparative Analysis of Lead‐ and Tin‐Based Perovskite‐Sensitized Solar Cells Integrated With Solid Polymer Electrolytes
Abstract
ABSTRACT This study reports the fabrication of perovskite‐sensitized solar cells (PSSCs) using lead‐ and tin‐based perovskite sensitizers: methylammonium lead iodide (CH 3 NH 3 PbI 3 ), methylammonium lead bromide (CH 3 NH 3 PbBr 3 ), and methylammonium tin chloride (CH 3 NH 3 SnCl 3 ). The perovskites were synthesized via optimized protocols ensuring high purity and crystallinity, confirmed by SEM and XRD analyses. Under standard illumination (1 sun, 100 mW/cm 2 ) and using a PEO: KI/I 2 electrolyte, CH 3 NH 3 PbI 3 exhibited superior photovoltaic performance with a V oc of 0.96 V, fill factor of 0.64, J sc of 6.8 mA/cm 2 , and efficiency of 4.2%. CH 3 NH 3 SnCl 3 showed moderate efficiency (2.7%) with slightly lower Voc and J sc values, offering a less toxic alternative to lead‐based sensitizers. CH 3 NH 3 PbBr 3 demonstrated lower efficiency (1.5%), highlighting the influence of halide variation on device properties. This comparative analysis provides insights into the relationship between perovskite composition and solar cell performance, supporting advancements toward efficient, low‐cost, and environmentally friendly PSSCs.