Communications Materials Mechanics of Materials

Additively manufacturing printed circuit boards with low waste footprint by transferring electroplated zinc tracks

Jonathon R. Harwell, Tianwei Zhang, Andrew Rollo, Mahmoud Wagih, Jeff Kettle
Springer Nature · 2025-12-13 · DOI 10.1038/s43246-025-01031-7

Abstract

Abstract Recyclable, degradable and printed electronics are gaining attention as solutions to the growing e-waste problem, but achieving high-resolution, high conductivity circuits with low end-of-life waste footprint remains difficult. Here we show the demonstration of a Printed Circuit Board Assemblies where over 99% of mass degrades into low-toxicity products in controlled or soil environments. Our “growth-and-transfer” process electroplates conductive bulk zinc onto a sacrificial carrier before transfer to a biodegradable substrate. This yields 5 µm track resolution, 3 mΩ/sq sheet resistance, and a shelf life over one year. Performance, lifetime, and degradability were tested, showing rapid degradation in soil under composting conditions. Life Cycle Assessments benchmarked against conventional fibreglass-copper circuit boards reveal a 79% reduction in Global Warming Potential. High-value components, chips, and LEDs are recycled by rinsing in a mild acetic acid solution, with minimal component damage. Our work shows how additive bulk metal growth, benign degradation, and chip recovery could combine to realise high-performance circuit boards with design-for-circularity principles.

Read at publisher →