Piezo-mechanical enhancements of flexible sensing element with modified carbon nanofibers
Аннотация
In this study, the effect of surface modification of carbon nanofibers (CNFs) on the sensitivity and mechanical strength of flexible piezoelectric sensing elements was investigated. Surface modifications of CNFs were carried out with l -ascorbic acid (LAA) and sodium borohydride (SB). In this regard, polyacrylonitrile-based CNFs were produced via electrospinning and subsequent heat treatment steps. Morphological investigations revealed a dramatic decrease in nanofiber diameter after carbonization, which was further accentuated by subsequent surface modification. CNF-SB nanofibers used as a reinforcement element in a polydimethylsiloxane (PDMS) matrix exhibited significant mechanical improvements of up to 52%, thereby supporting sensing element durability. CNF treated with LAA in an Ecoflex matrix, which is a ductile material, increased the tensile strength by 3.85%. In the sensing element where CNFs were incorporated into the PDMS matrix, the average output signal increased by 1.78% from 1.69 to 1.72 V; whereas the Ecoflex-based sensing element produced the highest average sensor signal, at 1.86 V. These results demonstrated that surface modifications of carbon nanofibers in CNF-based flexible composite had a significant effect on the electrical and mechanical properties of the piezoelectric sensing element. Graphical abstract