Bis(methyl carbamate) derivative as a sustainable rubber additive: processing aid and cure-accelerating effects in natural rubber compounds

Acta Neurochirurgica · Springer Nature · 2026-10-12 · DOI: 10.1007/s42464-026-00408-8

Аннотация

Carbamate derivatives have been widely explored in synthetic and medicinal chemistry, but their potential application as functional additives in rubber compounding remains limited. In this study, a bis(methyl carbamate) derivative (BMCA) was synthesized using dimethyl carbonate (DMC) through a solvent-free and catalyst-free route and evaluated as a sustainable additive in carbon black-filled natural rubber (NR) compounds. The effects of BMCA on curing behaviour, processing behaviour, mechanical properties, swelling behaviour, viscoelastic properties, and surface wettability were investigated. BMCA compounds showed reduced scorch time and optimum cure time, with the cure rate index increasing from approximately 34–37 min − 1 for the control formulations to approximately 48 min − 1 for the BMCA formulation, indicating cure-accelerating behaviour. The reduced Mooney viscosity with lower minimum torque relative to Control N suggested an improved processing-aid effect. However, the increase in modulus, hardness, and crosslink density indicated that BMCA did not act as a conventional softening plasticizer. Instead, BMCA may be better described as a processing aid with partial plasticizing effect and crosslink-enhancing behaviour. These findings suggest that BMCA is a promising sustainable rubber additive. Nevertheless, further modification, dosage optimisation, and mechanistic studies are required before BMCA can be considered as a replacement for conventional accelerators or plasticizers.

Читать у издателя →

Похожие статьи