European Journal of Wood and Wood Products Биологические науки
Comparative analysis of charred wood layers produced by two distinct high‑temperature treatment methods
Аннотация
Developing innovative solutions for the thermal treatment of wood surfaces is a current research topic. In this regard, charring wooden boards represents a satisfactory compromise, providing adequate protection for the wood surface. However, this technique is inconsistent. An alternative approach is wood pyrolysis using the contact hot plate method, which has been shown to provide reasonably good wood protection while maintaining sufficient mechanical properties when applied correctly. The objective of the present study was to investigate an innovative technique employing arc-discharge charring. The primary motivation of this study was to develop in-depth knowledge and to present new possibilities that could replace the above-mentioned techniques. The study analysed the structure and roughness of thermally treated wooden surfaces using microscopic techniques. Furthermore, the specimens were examined cross-sectionally to determine and characterise changes in the depth profile. The mechanical properties at the microstructural level were evaluated using nanoindentation, while Fourier-transform infrared spectroscopy was used to analyse changes in chemical composition after treatment. The data obtained provide valuable insights into structural changes that can be used to optimise technological processes for wood conservation and surface treatment.