Use of a Zeolite-Containing Fischer–Tropsch Synthesis Catalyst for Producing High-Quality Motor Fuel Components

Chemistry and Biodiversity · Wiley · 2026-09-23 · DOI: 10.1134/S0965544126601201

Аннотация

Abstract The possibility of using a Co-zeolite catalyst for increasing the content of diesel fuel components in synthetic oil formed in its presence was demonstrated. The presence of HBeta zeolite allowed production of synthetic oil directly from СО and Н 2 and not via waxes from the Fischer–Tropsch synthesis as implemented in industry. At the same time, the quality of the diesel fraction components remained high. An increase in the reactor diameter and optimization of the synthesis conditions led to an increase in the diesel fraction content from 32 to 44 wt %. The content of n -paraffins responsible for high cetane number reached 80 wt %. The optimum conditions for the commercial-scale production of synthetic oil enriched in diesel fuel components are 237–243°С and gas hour space velocity (GHSV) of 2200–2400 h –1 at a pressure of 2.1 MPa; they provide the synthetic oil productivity of the catalyst of 160 g/(kg h). The properties of the diesel fraction were studied by the calculation (based on the hydrocarbon composition determined by chromatography) and experimental methods. The diesel fraction of the synthetic oil meets the requirements for the cetane number, flash point, and cloud point of diesel fuel; however, the density, kinematic viscosity, and lubricating efficiency are below the required levels. The operation characteristics of petroleum diesel fuels can be improved by blending the components of the synthetic diesel fraction with the petroleum fraction; which led to an increase in the density and kinematic viscosity. The lubricating efficiency was improved by introducing 0.04 wt % antiwear additive.

Читать у издателя →

Похожие статьи