Rare Metals Metals and Alloys

Ni‐Induced Interface Refinement Enhances Strength‐Ductility Synergy in LPBF‐Processed Ti‐Mo‐Ni Alloy

An Li, Qi Wang, Ying Gao, Xin Ding, Yanqing Su, Hengzhi Fu, Ruirun Chen
Springer Nature · 2026-09-01 · DOI 10.1002/rar2.70505

Abstract

ABSTRACT Microstructural refinement is a common strategy for strengthening additively manufactured titanium alloys because it promotes phase nucleation. Reducing the α/β interfacial formation energy is an effective way to increase the nucleation rate. In this study, a Ti‐Mo‐Ni alloy with a favorable strength‐ductility balance was fabricated by laser powder bed fusion (LPBF). Ni preferentially partitions to the α/β interfaces, reducing the interfacial formation energy and increasing the work of adhesion. The reduced interfacial formation energy increased the nucleation rate and promoted the formation of a nano‐lamellar structure, with a minimum β‐phase thickness of 21.8 nm. The results show that the interface acts as both a barrier to dislocation motion and a source of dislocations during deformation; together with the hierarchical dislocation response in the nano‐lamellar structure, this effect enhances strength. The LPBF‐processed samples achieved an ultimate tensile strength of 998 MPa, markedly higher than that of the as‐forged samples (535 MPa). In addition, the slip and fracture mechanisms were examined, and the effects of the nano‐martensitic structure were compared with those of the conventional equiaxed microstructure in the as‐forged alloy. This study shows that lowering interfacial formation energy through minor Ni‐induced compositional modulation, together with the rapid cooling and undercooling provided by LPBF, promotes the formation of nano‐martensitic structures. These findings provide a new strategy for designing LPBF‐processed titanium alloys with high strength and good ductility.

Read at publisher →