High‐Performance Self‐Powered Ultraviolet Photodetector Based on NiO/La‐Doped SrSnO <sub>3</sub> /Nb‐Doped SrTiO <sub>3</sub> Dual‐Heterojunction
Abstract
ABSTRACT The development of high‐performance photodetectors critically relies on innovative interfacial band engineering, a strategy that enables the synergistic enhancement of photocurrent and drastic suppression of dark current. Herein, a self‐powered ultraviolet (UV) photodetector is demonstrated based on a NiO/La‐doped SrSnO 3 (LSSO)/Nb‐doped SrTiO 3 (NSTO) dual heterojunction. Benefiting from the reinforced interfacial potential barriers and multiple built‐in electric fields at both the NiO/LSSO and LSSO/NSTO interfaces, the device achieves highly efficient charge separation while effectively inhibiting carrier leakage in the dark. Consequently, the photodetector exhibits an ultra‐low dark current of 0.18 pA at zero bias. Under 254 nm UV illumination, the device delivers a high responsivity of 41.81 mA W −1 , a specific detectivity of 7.87 × 10 12 Jones, a photocurrent‐to‐dark‐current ratio as high as 4.4 × 10 4 , and rapid response times (rise/fall) of 2.89/13.93 ms. These results underscore the advantages of the dual‐heterojunction architecture in boosting photoelectric conversion efficiency and suppressing noise, thereby providing a robust strategy for high‐performance, oxide‐based self‐powered UV photodetection.