Large deflection analysis of stepped 3D functionally graded beams using a discrete mechanical model

Revista de la Real Academia de Ciencias Exactas, Físicas y Naturales. Serie A. Matemáticas · Springer Nature · 2026-09-07 · DOI: 10.1007/s10665-026-10551-1

Аннотация

This work presents a discrete mechanical formulation for the nonlinear static bending analysis of stepped three-directional functionally graded material (3D-FGM) beams under different loading conditions. The beam is modeled by transverse displacement degrees of freedom connected through rotational springs for bending rigidity and longitudinal springs for the stretching effect induced by large deflections. The material properties vary continuously in the axial, width, and thickness directions, while the stepped geometry is described by piecewise constant cross-sectional dimensions. The nonlinear equilibrium equations are derived from the stationarity of the total potential energy. To reduce the computational effort, an adapted second reduced formulation is employed, where the dominant generalized displacement is treated explicitly, and the remaining correction components are obtained from a reduced linear system. The nonlinear deflection field is then reconstructed using the eigenvector basis of the linear stiffness matrix. Parametric investigations are carried out to assess the effects of step ratio, step location, gradation indices, boundary conditions, loading type, and load intensity on the nonlinear load–deflection response. The results show that the proposed discrete approach efficiently captures the coupled effects of material gradation, geometric discontinuities, and large-deflection nonlinearity.

Читать у издателя →

Похожие статьи