Laser and Photonics Reviews Электронные, оптические и магнитные материалы

Cationic Site and Bandgap Engineering: A Route to High‐Performance NIR‐I Emitting Double Perovskites (Sr, Ba) 2 (Ga, Ta, Al)O 6 : Cr With Long Persistent Luminescence for Multi‐Scenario Applications

Jian Peng, Xingyu Li, Zihan Xiong, Longfei Zhang, Weiming Tan, Zihao Xu, Wubin Dai
Wiley · 2026-11-17 · DOI 10.1002/lpor.72244

Аннотация

ABSTRACT Owing to diversity/tunability of structural composition, double perovskites provide an ideal platform for the study of Cr 3+ photoluminescence (PL) in the NIR region. However, low efficiency, poor stability, and hard to concurrently achieve long‐persistent PL (LPL) still need to be addressed. Herein, Cr 3+ monodoped rigid Sr 2 GaTaO 6 with large bandgap in Ga/Ta sites, identified by structural (i.e., XRD, aberration‐corrected STEM) and dynamic/static spectroscopy analysis, exhibits both narrow/broad PL ( 2 E g , 4 T 2 → 4 A 2 ) in red‐to‐NIR‐I region peaked at ∼750 nm with fwhm of 145 nm, IQE of 47.2%, and thermal stability of 54%@423 K under 455 nm excitation. Through synergistic A/B site‐regulations (Ba 2+ /Al 3+ → Sr 2+ /Ga 3+ ) by modifying charge density, symmetrical polarizability, and the crystal field around Cr 3+ , PL in (Sr, Ba) 2 (Ga, Ta, Al)O 6 : Cr shifts from red‐to‐NIR‐I to the pure NIR‐I region with better IQE (74.5%) and thermal stability (86%@423 K). Benefiting from heterovalent substitution (Al 3+ → Ta 5+ ) with generation of defects and alteration of bandgap, an appealing NIR‐I LPL is gained with a duration >6 h. A highly‐efficient and stable NIR‐I (Sr, Ba) 2 (Ga, Ta, Al)O 6 : Cr‐converted LED is assembled based on a commercial 460 nm blue chip, and its multi‐scenario utilizations in plant growth, non‐destructive detection, and anti‐counterfeiting are demonstrated as proof‐of‐concept applications.

Читать у издателя →