Journal of Agricultural Engineering (India) Биоинженерия
<b>Comparative Analysis of Drying Characteristics and Kinetic Modelling of Bamboo Shoots (<i>Dendrocalamus hamiltonii</i>) using Different Drying Methods</b>
Аннотация
The drying kinetics of bamboo shoot (Dendrocalamus hamiltonii) slices were investigated using three drying methods: Open Sun Drying (OSD), Cabinet Solar Drying (CSD), and Cabinet Tray Drying (CTD). Cabinet tray drying was conducted at 60°C, whereas OSD and CSD were carried out under ambient and passive solar conditions, respectively. Moisture content, moisture ratio, and drying rate were analyzed to compare the drying characteristics of the three methods. CTD achieved the desired final moisture content in 16 h, followed by CSD in 19 h and OSD in 24 h, demonstrating a reduction in drying duration under controlled drying conditions. Among the three methods, CTD exhibited the shortest drying time. Three thin-layer drying models, namely Newton, Page, and Logarithmic, were evaluated to characterize the drying behaviour. The Page model provided the best fit for OSD (R² = 0.9982, χ² = 1.85 × 10⁻⁴, RMSE = 0.0130) and CTD (R² = 0.9987, χ² = 1.42 × 10⁻⁴, RMSE = 0.0112), whereas the Logarithmic model provided the best fit for CSD (R² = 0.9959, χ² = 4.70 × 10⁻⁴, RMSE = 0.0200). The effective moisture diffusivity ranged from 2.1 × 10⁻¹⁰ to 7.9 × 10⁻¹⁰ m² s⁻¹, with the highest value observed for CTD. Overall, the findings indicate that controlled drying improved the consistency and rate of moisture removal, while differences in model performance among the drying methods demonstrate that no single model provided the best statistical fit under all drying conditions.