Experimental and environmental assessment of a locally manufactured adsorption desalination–cooling system under harsh climatic conditions
Аннотация
Conventional desalination and cooling systems are highly energy-intensive and associated with environmental concerns. This paper presents an experimental and environmental study of a locally fabricated adsorption cooling and desalination system designed for the extreme climate of Saudi Arabia. The effects of key operating parameters and various modes of cooling water operation have been studied systematically. In addition, the influence of fin-gap spacing in the adsorption bed was investigated, considering two types of fin gaps of 2 mm and 3 mm. Five cooling water operation modes, which include variable temperatures and cascade cooling configurations, have been evaluated to enhance efficient use of cooling water and high energy conversion efficiency. Experimental results showed that system performance depends significantly on operating conditions and adsorption bed geometry. A fin gap of 2 mm produced the highest specific daily water production (SDWP) of 6.43 m³/ton·day and specific cooling power (SCP) of 182.2 W/kg compared to the 3 mm gap with SDWP and SCP of 5.30 m³/ton·day and 150.1 W/kg, respectively. A significant improvement in both cooling and desalination capacity resulted from increasing the regeneration temperature, whereas optimizing cycle timing resulted in higher adsorption-desorption efficiency. Among the cooling-water operational modes tested, the cascade cooling configuration appeared to be quite efficient in reducing the need for cooling water while sustaining reliable system operation. Environmental impact assessment for a 40 kg adsorption module demonstrated that the proposed ADC system reached more than 99% lower lifecycle CO₂ emissions compared with conventional air conditioning coupled with reverse osmosis systems.