Abstract 3D‐printed photodynamic materials offer a route to fabricate light‐activated antimicrobial objects, but their performance depends strongly on photosensitizer (PS) retention, accessibility, and photophysical behavior after thermal processing. Here, rose bengal (RB) and zinc(II) phthalocyanine (ZnPc) were incorporated into polylactic acid (PLA) at 0.5% (w/w) and processed by melt extrusion and three‐dimensional printing. The characteristic absorption and fluorescence emission bands of both chromophores were retained after processing, and the dual formulation provided complementary absorption in the green and red regions of the visible spectrum. RB release from the dual‐PS material followed biexponential kinetics, with k fast = 1.39 ± 0.29 min −1 and k slow = 0.013 ± 0.004 min −1 . Under white‐light irradiation, RB‐containing materials produced approximately 5–6 log reductions (>99.999%) in bacterial viability, with Bacillus subtilis inactivated more rapidly than Escherichia coli . ZnPc‐containing PLA alone produced only partial inactivation, and no appreciable dark toxicity was observed. These results identify PS accessibility as a critical parameter governing the performance of melt‐processed photodynamic materials.
Jesús Gómez, Michael Fleming, Nitika Paudyal, Taufiq Khan, Andrés M. Durantini. Dual‐photosensitizer polylactic acid filaments for 3D‐printed photodynamic antimicrobial materials. // Photochemistry and Photobiology. – 2026. – DOI: 10.1111/php.70156. – URL: https://onlinelibrary.wiley.com/doi/10.1111/php.70156?af=R
Jesús Gómez, Michael Fleming, Nitika Paudyal, Taufiq Khan, & Andrés M. Durantini (2026). Dual‐photosensitizer polylactic acid filaments for 3D‐printed photodynamic antimicrobial materials. Photochemistry and Photobiology. https://doi.org/10.1111/php.70156
Jesús Gómez, et al. “Dual‐photosensitizer polylactic acid filaments for 3D‐printed photodynamic antimicrobial materials.” Photochemistry and Photobiology, 2026. doi:10.1111/php.70156.
@article{Gmez2026,
title = {Dual‐photosensitizer polylactic acid filaments for 3D‐printed photodynamic antimicrobial materials},
author = {Gómez, Jesús and Fleming, Michael and Paudyal, Nitika and Khan, Taufiq and Durantini, Andrés M.},
journal = {Photochemistry and Photobiology},
year = {2026},
doi = {10.1111/php.70156},
url = {https://onlinelibrary.wiley.com/doi/10.1111/php.70156?af=R}
}
Abstract The rise of multidrug‐resistant bacteria demands innovative antimicrobial strategies that combine multiple mechanisms of action. Selenium nanoparticles functionalized with 5‐aminolevulinic acid (ALASe) offer a dual‐action...
Abstract To evaluate the field performance of human‐occupied air disinfection strategies in high‐risk healthcare areas, field tests were conducted in the high‐risk triage area, infectious disease ward, and dental clinics of a top‐tier...
Abstract Two new cationic BODIPY dyes have been synthesized and characterized. Methylation of the nitrogen‐atoms associated with the isoquino‐based BODIPY core provides water solubility via a high‐yield one‐step process. Dye 2 shows...
Abstract Sunlight ultraviolet radiation A and B (UV‐A and UV‐B) affect human skin and may be a cause of cancer. Damage to skin nerve fibers and cell DNA is often observed following excessive unprotected exposure. Plants produce numerous...
Abstract Azafluoranthene derivatives bearing an amino group exhibit fluorescence in the visible region and have been shown to be incorporated into cells, suggesting their potential as fluorescent probes. In our previous study, the...