A Study on the Effects of Trailing-Edge Modification on the Aeroacoustic Performance of Roof-Mounted Wind Turbines

Journal of Optics · Springer Nature · 2026-06-01 · DOI: 10.1134/S1063771026600580

Аннотация

Abstract To address the aerodynamic noise of rooftop wind turbines in urban confined flow fields, this study proposes a trailing edge perforation (TEP) modification. Based on the NACA 4412 airfoil, Large Eddy Simulation (LES) and the FW-H acoustic analogy method are employed to systematically investigate the noise suppression mechanisms of TEP diameters ranging from 1.0 to 2.5 mm. Comparative analysis reveals that TEP forms micro-jets connecting the pressure and suction surfaces. This effectively reduces local pressure differences at the blade tip, completely disrupts the azimuthal coherence of large-scale detached vortices, and accelerates their dissipation. A 2.0 mm diameter was identified as the optimal parameter. Aerodynamically, it increased the maximum tip velocity by 4.2%, slightly improving performance. Acoustically, it achieved a maximum near-field noise reduction of 2.4 dB in the 270° primary radiation direction. Furthermore, at 6 m in the radial and axial far fields, stable noise reductions of 2.2 and 2.3 dB were achieved, respectively. Spectral analysis also confirmed a significant 6.2 dB reduction in peak low-frequency noise within the lateral near-wall core region. This study validates the potential of TEP technology for the synergistic optimization of aerodynamic and acoustic performance, providing a solid engineering strategy for the quiet design of urban distributed wind energy devices.

Читать у издателя →

Похожие статьи