Effect of Mechanical Activation of Carbon Black on the Densification and Combustion Behavior of Ti + C Mixtures

Nature Photonics · Springer Nature · 2026-06-01 · DOI: 10.1134/S0010508226700401

Аннотация

Abstract We have studied the effect of preliminary mechanical activation (MA) of carbon black powder on the properties, densification, and combustion behavior of equiatomic Ti + C mixtures. MA has been shown to cause breakdown of the arched structure and disintegration of agglomerates of carbon black, leading to an increase in its bulk density by more than three times. During densification, carbon black powder behaves as a solid nonplastic material with a high elastic recovery value (up to 14%). Increasing the relative density of Ti + C mixtures to above 0.52 has been shown to lead to the formation of a skeleton of titanium particles, which is responsible for the strength properties of the green compacts. Densification of Ti + C mixtures at compaction pressures below 50 MPa corresponds to a structural deformation stage. At higher pressures, an elastoplastic deformation stage begins. At the beginning of the elastoplastic deformation stage, the relative density of green compacts prepared from Ti + C mixtures depends on the degree of MA of the carbon black powder. At a compaction pressure of 50 MPa, mixtures containing finer carbon black particles can be densified to a higher relative density: 0.65. The combustion temperature of Ti + C compacts as a function of their relative density and compaction pressure has a maximum. Increasing the density of Ti + C mixtures in the structural deformation stage (pressure below 50 MPa) ensures an increase in the contact surface area between the reactants and, as a consequence, a rise in combustion temperature. Upon a further increase in compaction pressure at the beginning of the elastoplastic deformation stage, the increase in the contact surface area between the titanium particles leads to a decrease in combustion temperature. The absolute value of the maximum in the combustion temperature has been shown to rise with increasing density: a mixture containing untreated carbon black had T max ≈ 2900°C at a relative density of 0.58, a mixture containing carbon black after MA for 3 h had T max ≈ 3000°C at a density of 0.63, and a mixture containing carbon black after MA for 20 h had T max ≈ 3200°C at a density of 0.65. With increasing compaction pressure, the combustion speed decreases because of the degradation of conditions of impurity gas removal from the bulk of the green compacts. The formation of slip cracks has been shown to cause a sharp rise in combustion speed.

Читать у издателя →

Похожие статьи