Wood Science and Technology Industrial and Manufacturing Engineering
The effects of artificial aging on the acoustic vibration performance and its relationship with chemical and physical properties and pore structure in bamboo and wood
Abstract
The effects of xenon lamp accelerated aging on the acoustic vibration performance of Phyllostachys edulis (Carrire) J. Houz. and Paulownia elongata S. Y. Hu were thoroughly investigated. This study also evaluated the changes in chemical and physical properties, and pore structure under the xenon lamp accelerated aging conditions, and attempt was made to evaluate the relationship of the acoustic vibration performance with the chemical and physical properties, and pore structure. During the photoaging process of the bamboo and wood, the lignin content decreased by 7.76% and 21.17%, respectively. The degradation of cell wall components led to a continued decrease in the surface brightness, and color tended to be red and yellow. With the continued loss in the mass and density of the two species, the specific dynamic elastic modulus ( Esp )increased by 1.47% and 1.93%, respectively, and the acoustic vibration efficiency was improved. The proportion of mesopores with pore size of 10–50 nm increased by 10.62% and 17.08%, respectively. The optimization of the sound transmission channels could reduce the acoustic impedance and thus improved the acoustic radiation quality constant ( R ) and increased the acoustic conversion efficiency ( ACE ) by 16.06% and 22.43%, respectively. Under the same photoaging conditions, the wood showed larger changes in chemical composition degradation, physical structure relaxation, pore network reconstruction and acoustic vibration performance than the bamboo. It appears that the wood shows stronger aging response and thus has higher potential for the control and improvement of acoustic vibration performance.