ABSTRACT The Coaxial Magnetized Plasma Accelerator (CMPA) converts electromagnetic energy into kinetic and thermal plasma flux via self‐induced Lorentz forces. In this study, we develop a magnetohydrodynamic (MHD) numerical model to systematically elucidate the regulatory mechanisms of electrode geometric parameters on plasma jet dynamics. Specifically, we decouple the contributions of three critical geometric parameters, namely, the length and width of the plasma generation channel and the inner diameter of the acceleration channel, and analyze their effects on jet velocity, temperature, and pressure. The results indicate that, under the premise of ensuring discharge stability, a design strategy characterized by an elongated channel, narrow width, and moderate inner diameter should be adopted to achieve efficient conversion of electromagnetic energy into both kinetic momentum and internal energy of the jet. This work provides theoretical support for the structural optimization and performance enhancement of CMPA devices.
Zhihao Wang, Bo Gao, Qi Li, Tonghe Zhang, Lie Liu. Effect of Electrode Geometry on the Characteristics of Coaxial Magnetized Plasma Jets. // Contributions to Plasma Physics. – 2026. – DOI: 10.1002/ctpp.70160. – URL: https://onlinelibrary.wiley.com/doi/10.1002/ctpp.70160?af=R
Zhihao Wang, Bo Gao, Qi Li, Tonghe Zhang, & Lie Liu (2026). Effect of Electrode Geometry on the Characteristics of Coaxial Magnetized Plasma Jets. Contributions to Plasma Physics. https://doi.org/10.1002/ctpp.70160
Zhihao Wang, et al. “Effect of Electrode Geometry on the Characteristics of Coaxial Magnetized Plasma Jets.” Contributions to Plasma Physics, 2026. doi:10.1002/ctpp.70160.
@article{Wang2026,
title = {Effect of Electrode Geometry on the Characteristics of Coaxial Magnetized Plasma Jets},
author = {Wang, Zhihao and Gao, Bo and Li, Qi and Zhang, Tonghe and Liu, Lie},
journal = {Contributions to Plasma Physics},
year = {2026},
doi = {10.1002/ctpp.70160},
url = {https://onlinelibrary.wiley.com/doi/10.1002/ctpp.70160?af=R}
}
ABSTRACT Polyurethane hot‐melt adhesives (PU‐HMAs) are widely used, yet face a long‐standing trade‐off between low viscosity required for effective interfacial establishment and high crosslink density necessary for mechanical robustness...
ABSTRACT Environmentally sustainable processing of perovskite solar cells (PSCs) requires green solvent systems that can simultaneously produce high‐quality perovskite thin films with high efficiency and long‐term stability. Here, we...
ABSTRACT Defects at the surfaces and grain boundaries of perovskite films seriously restrict the power conversion efficiency (PCE) and stability of perovskite solar cells (PSCs). While post‐treatment with organic cations is widely...
ABSTRACT A fundamental challenge in bioelectronics is to create an electrical bioadhesive interface that forms spontaneously, adheres robustly, and integrates seamlessly with dynamic tissues. While in‐situ hydrogels offer a potential...