Polymer Engineering and Science Химия материалов

Structure–Processing Relationships in Nanomodified Urea–Formaldehyde Adhesives: Effects of Inorganic and Cellulosic Nanomaterials on Rheology and Curing Behavior

Pavlo Bekhta, Serhiy‐Ivan Bekhta, Volodymyr Mayevskyy, Ján Sedliačik
Wiley · 2026-11-21 · DOI 10.1002/pen.71036

Аннотация

ABSTRACT Modifying urea–formaldehyde (UF) adhesives with nanomaterials offers opportunities to tailor rheological properties and curing behavior for wood‐based composite manufacturing. This study comparatively investigates four inorganic oxides (SiO 2 , TiO 2 , Al 2 O 3 , and ZnO) and two cellulosic nanomaterials (cellulose nanocrystals [CNC] and cellulose nanofibrils [CNF]) incorporated at 1, 3, and 5 wt% into commercial UF resin. Unlike studies focusing primarily on individual nanomodifiers or final composite performance, this work provides a direct comparative assessment of inorganic and cellulosic nanomaterials within the same UF resin–hardener system, establishing their concentration‐dependent effects on adhesive rheology and condensation kinetics. Nanomaterial type and concentration strongly influenced adhesive viscosity and condensation time. CNF caused the greatest viscosity increase, reaching 3771 mPa.s at 1 wt%, while concentrations ≥ 3 wt% produced non‐flowable pastes. SiO 2 exhibited a nonlinear viscosity increase, reaching 18,162 mPa.s at 5 wt%. In contrast, TiO 2 and Al 2 O 3 maintained viscosities below 700 mPa.s at 5 wt%. TiO 2 accelerated condensation, reducing the condensation time by 22.7% at 3 wt%, whereas Al 2 O 3 had negligible effects. Higher SiO 2 and CNC loadings prolonged condensation, while CNF delayed curing. ZnO strongly inhibited curing, with condensation times exceeding 660 s, accompanied by persistent tackiness and severe foaming. These findings identify TiO 2 (1–3 wt%) and SiO 2 (1–2 wt%) as promising modifiers, whereas high CNF loadings and unmodified ZnO are unsuitable under the investigated conditions. The results provide practical guidance for selecting nanomodifiers to balance processability and curing performance.

Читать у издателя →