Gaseous Detonation of Acetylene–Oxygen Mixtures Diluted with Argon or Helium and Their Application in Detonation Spraying

Nature Photonics · Springer Nature · 2026-06-01 · DOI: 10.1134/S0010508226700334

Аннотация

Abstract The detonation of acetylene–oxygen mixtures diluted with helium or argon is studied in an extended channel with a flow-through supply of explosive mixture components at atmospheric pressure. The steady detonation velocity and the temperature and dynamic pressure of the products were calculated. The limits of existence of self-sustaining detonation in a channel with a diameter of 26 mm are determined for equimolar and stoichiometric mixtures diluted to 92% with both helium and argon. Near the limits, near-spin detonation is initiated without a noticeable deflagration-to-detonation transition by a booster charge of an equimolar acetylene–oxygen mixture, whose volume does not exceed 180 cm 3 or 13 channel diameters. Detonation coatings made of pure titanium were obtained using both helium and argon as a purge gas. The use of helium leads to the formation of a dense coating with porosity <0.5% and a microhardness of 370 HV300. Argon enables the production of coatings with a developed surface area and high (tens of percent) porosity in the surface layer, which have potential applications in catalytic reactors and in medical implant manufacturing.

Читать у издателя →

Похожие статьи