Extracting Rare Elements from Coal
Аннотация
Abstract The possibility of extracting rare and rare earth metals from volatile ash residues formed in the combustion of lignite from the Transbaikal territory in a semicoking furnace is considered. A semicoke separation system consisting of a furnace with a retort and a unit for gas and dust capture is used for combustion of the lignite at 500–550°C. The efficiency of dust capture is 95%. After combustion, the captured dust (volatile products) is enriched (by a hydrometallurgical method) to extract rare elements (metals). This technology yields semicoke, which is widely used in industry, and a volatile component, which is a source of rare metals (if they are also present in the initial lignite). The elemental composition of the lignite samples and their ashy volatile products in the semicoking furnace is determined. The content of rare and rare earth metals in the production solution is established. It is found that rare and rare earth metals (Ga, Rb, Ti, Sr, Zr, Ge) may be extracted from the volatile ash residues of lignite combustion by leaching with acids (HNO 3 , H 2 SO 4 , HCl, and mixtures of HNO 3 with HCl). The best leaching conditions for the volatile ash residues of coal are observed when ultrasound is applied to the pulp so that the rare and trace elements (titanium, strontium, gallium, and rubidium) required in high-tech industries are efficiently extracted.