Mechanochemistry‐Mediated Conversion of Surface Alumina From Barrier to Bridge for High Thermal Conductivity Composites

Yixuan Cao, Dawei Luo, Fujie Wang, Shuangqiao Yang
Advanced Functional Materials · Wiley · 2026-11-17 · DOI: 10.1002/adfm.79632

Аннотация

ABSTRACT Recent advances in thermally conductive composites have significantly improved heat dissipation, yet the scalable and low‐cost fabrication of isotropic high thermal conductivity materials remains a major challenge. Here, we present a mechanochemical strategy for the stable integration of liquid metal (LM) with aluminum (Al) flakes, producing Al@LM (AlM) heterogeneous fillers. The unique Al‐Al 2 O 3 ‐LM heterostructure enables LM to form a hot carrier bridge between adjacent AlMs. The thermal resistance of LM bridge is only 1.37 × 10 −9 m 2 K/W, which is one order of magnitude lower than that of the Al 2 O 3 ‐Al 2 O 3 imperfect interface. As a result, the composites achieve an isotropic thermal conductivity of 17.59 W/m·K (surpassing that of 304 steel) while maintaining a flexural strength of 65.4 MPa. The Al 2 O 3 shell blocks electron transport yet permits phonon transfer, conferring excellent electrical insulation (1.5 × 10 9 Ω/cm). Beyond serving as bulk plastics, the composite can function as adhesive, exhibiting thermal resistance of only 13.3 mm 2 K/W and shear adhesive strength of 6.3 MPa. Meanwhile, the dynamic covalent network of matrix enables composites to maintain thermal management performance after repeated processing and recycling. This work establishes a simple and scalable strategy for stabilizing LMs on Al fillers and advancing sustainable thermal management materials.

Читать у издателя →

Похожие статьи