Applied Intelligence Artificial Intelligence

Predicting optimal conditions to reach target particle morphologies in emulsion polymerization: a reverse engineering approach

Leo Vattoly, Nicholas Ballard, Usue Mori Carrascal, Jose A. Lozano
Springer Nature · 2026-11-01 · DOI 10.1007/s10489-026-07563-w

Abstract

Abstract Particle morphology is a critical property of emulsion polymers that dictates their application properties. Achieving the desired morphology during the emulsion polymerization process requires precise control over the reaction parameters, such as the temperature profile and monomer feed rates. Traditional trial-and-error methods for experimentally optimizing these conditions are resource-intensive in terms of time and wasted chemical components. This study presents a Reverse Engineering (RE) methodology designed to predict the optimal values for the temperature and monomer feeding profiles to achieve specified particle morphologies. Our model consists of a deep learning-based surrogate model that can efficiently predict complex particle morphologies from monomer and temperature profiles. An optimization strategy was used to guide the surrogate toward configurations that closely match the targeted morphology distributions while optimizing reactor efficiency. The approach was validated by comparing the error between the distributions generated by the mathematical model for seeded semi-batch emulsion polymerization and those produced using the predicted optimal parameter combinations. The results demonstrated the effectiveness of the RE methodology in predicting the reaction conditions that lead to a given target particle morphology.

Read at publisher →