International Journal of Circuit Theory and Applications Прикладная математика
A Novel Nonisolated Step‐Up/Down DC–DC Converter With a Wide Voltage Gain Range
Аннотация
ABSTRACT This paper proposes a novel nonisolated step‐up/down DC–DC converter derived from the differential integration of conventional noninverting buck–boost and buck–boost converters, referred to as the DINiB 4 topology. The proposed integration eliminates redundant components and theoretically extends the voltage gain range to approximately twice that of the constituent converters while preserving identical input–output voltage polarity. All three active switches are driven by a single PWM signal, significantly simplifying the control. A comprehensive steady‐state analysis and detailed loss model are developed to evaluate voltage gain, semiconductor stresses, and efficiency across a wide operating range. Experimental validation was carried out using a 50‐W prototype operating at 100 kHz. The results demonstrate regulated operation in step‐down mode (input 30 V, output 24 V at D = 0.29) and step‐up mode (input 10 V, output 24.1 V at D = 0.55), an analytically estimated peak efficiency of approximately 94%. The measured voltage stresses on switches and diodes closely match the analytical predictions. Owing to its wide conversion range, high efficiency, and simple control, the DINiB 4 converter is well‐suited for applications requiring flexible voltage regulation, such as battery charging systems.