Utilization of Anthracite Coal in Coal Blend to Make Metallurgical Coke
Аннотация
Abstract Increasing scarcity and cost of prime coking coal have encouraged the utilization of alternative carbonaceous materials for sustainable metallurgical coke production. In the present research, anthracite coal has been incorporated into the blending of other imported coking coal by JSW Steel, and coal tar has been evaluated as a plasticizing additive to compensate for the poor thermoplastic properties of anthracite. Pilot-scale carbonization experiments were conducted using coal blends containing 0–20 wt % anthracite in a 120-kg pilot coke oven, operated at 1100°C for 24 h. Coal blends were characterized by proximate analysis, sulfur content, Gieseler fluidity, mean maximum reflectance (MMR), and crucible swelling number (CSN). In contrast, the resulting coke was evaluated by Coke Reactivity Index (CRI), Coke Strength after Reaction (CSR), porosity, and optical microscopy. It was found that coal blends containing up to 12 wt % anthracite with 4 wt % coal tar produced metallurgical coke with acceptable blast furnace quality (CSR > 66% and CRI 24–25%), whereas further increasing anthracite to 16 wt % resulted in a significant deterioration of coke quality due to insufficient plastic phase development and increased pore formation. The study demonstrates that up to 12 wt % anthracite can successfully replace conventional coking coal when combined with an optimum 4 wt % coal tar addition, providing a practical, economical, and sustainable approach for reducing dependence on prime coking coal while maintaining acceptable metallurgical coke quality.