Fire and Materials Electronic, Optical and Magnetic Materials

Fire Spread Characteristics of Cavities in Modular Constructions and Ventilated Facades

Rajeendra Godakandage, Pasindu Weerasinghe, Satheeskumar Navaratnam, Kumari Gamage, Kate (Quynh Thuy) Nguyen
Wiley · 2026-10-07 · DOI 10.1002/fam.70107

Abstract

ABSTRACT Modular buildings have gained popularity as a sustainable building solution. However, the uncertainty of fire spread through vertical cavity spaces in such buildings has become a concern. Therefore, this study aims to fill the gap in fire behaviour within vertical cavity spaces. First, an experiment was conducted using a parallel panel arrangement to simulate a cavity fire. It was later modelled in the Fire Dynamics Simulator and validated with experimental results. Later, the model was further validated with data in the literature. Then, a parametric study was conducted for a cavity width ranging from 25 to 200 mm and for the heat release rates of 10 and 40 kW. The simulated cavity fires resulted in a flame extension of up to 8.9 times and a plume flow velocity of up to 2.0 times compared to open fire scenarios. The cavity width was mainly identified to be inversely proportional to the considered fire properties. However, under a 40 kW fire, reducing the cavity width from 50 to 25 mm reduced incident radiative heat flux, cavity internal surface temperature, and flow velocity maximum up to 74%, 44%, and 48%, respectively. A set of empirical equations was developed to predict steady‐state cavity fire behaviour. Finally, the overall fire severity level variation with the cavity width is presented.

Read at publisher →