Journal of the Indian Academy of Wood Science Науки о растениях

Himalayan plants natural fibres-based woven mat reinforced polymer composites: a thermo-mechanical and abrasive wear study

Kumar, Hemant, Tejyan, Sachin, Kannan, M.
Springer Nature · 2026-06-01 · DOI 10.1007/s13196-026-00408-6

Аннотация

Natural fibers remain the preferred source for creating composite materials that produce lightweight and biodegradable products for both industrial and household applications. The goal of this research is to develop hybrid polymer composites filled with marble waste reinforced by Himalayan natural fibers, i.e., Grewia optiva, Nettle, and Bauhinia vahlii, and to evaluate their mechanical, viscoelastic, and abrasive wear behavior. Fibers were extracted conventionally, cleaned, and chemically treated before use as reinforcement. Composite plaques were fabricated using the conventional compression molding technique, with epoxy as the matrix material and varying amounts of mixed natural fibers in a woven form, at 10%, 20%, and 30% weight percentages. Additionally, 5 wt% of marble dust as a filler was utilized in all compositions to reduce void contents in composites. The composites' mechanical, physical, visco-elastic, and abrasive wear behavior was examined according to ASTM standards. Optimum impact strength, flexural strength, and tensile strength of 20 J, 27 MPa, and 38 MPa were achieved for GN30 (15 wt% Grewia optiva + 15 wt% Neetle) composites. The BN30 and BG30 composites achieve ideal values for loss modulus (E″), storage modulus (E′), and damping (tan δ). The wear rate of all composites increases as they experience increasing normal load and sliding distance; despite this, the composite BN30 (15 wt% Bauhinia vahlii + 15 wt% Nettle) has the lowest wear rate among all composites. The microscopic pictures of the wear surface of composites show that fiber micro-ploughing, pull-out, and are the most significant mechanisms causing wear.

Читать у издателя →