Remediation Загрязнение окружающей среды

Optimizing Operational Parameters for PFAS Permeable Adsorptive Barrier Emplacement

M. J. Ahmadi, Po‐Wei Huang, Kurt D. Pennell, Linda M. Abriola
Wiley · 2026-09-01 · DOI 10.1002/rem.70089

Аннотация

ABSTRACT Per‐ and polyfluoroalkyl substances (PFAS) pose serious threats to groundwater and ecosystems due to their environmental persistence and potential health effects. Permeable adsorptive barriers (PABs) are a promising, cost‐effective, in situ remediation technology that can control PFAS plume migration by passively sorbing PFAS contaminants. Among the most effective PAB materials is polymer‐stabilized activated carbon (SPAC), which can be injected to form a barrier, inhibiting PFAS plume migration. Although laboratory and field studies have demonstrated the potential of injectable activated carbons for in situ treatment of PFAS‐impacted soil and groundwater, the influence of installation design parameters on particle distribution and subsequent PAB performance and longevity remains insufficiently understood. In this article, a radial transport and retention model, based upon modified filtration theory (MFT), is coupled with a one‐dimensional pseudo‐first‐order sorption kinetic model to predict field‐scale SPAC emplacement and subsequent PAB performance. The coupled model is employed across a range of injection and subsurface conditions to examine the effect of key operational design parameters on the remediation of two representative PFAS. Simulations reveal that a high collision efficiency factor ( α ) yields robust SPAC retention across various installation strategies, while low α scenarios are more sensitive to operational parameters, such as injection rate, clean water chasing, and injected SPAC concentration. Under low α conditions, conventional barrier installation strategies may result in insufficient attached SPAC mass and short‐lived barriers. A push–pull injection method is proposed to improve performance under these conditions. In addition, field‐test simulations show that SPAC breakthrough data collected during pull phases could support in situ α estimation, providing attachment information more representative of full‐scale emplacement than laboratory column data alone. Findings underscore the importance of coupling modeling with laboratory measurement of site‐specific attachment properties to optimize PAB design for PFAS remediation.

Читать у издателя →