Fatigue and Fracture of Engineering Materials and Structures Mechanical Engineering

Fatigue Crack Evolution in Short‐Side‐Chain PFSA Catalyst‐Coated Membranes Revealed by In Situ 4D X‐Ray Computed Tomography

Shouwen Shi, Tiankuo Zhao, Guangxu Lu, Zichun Wu, Qiang Lin
Wiley · 2026-11-20 · DOI 10.1111/ffe.70528

Abstract

ABSTRACT In this study, catalyst‐coated membranes (CCMs) based on Aquivion short‐side‐chain PFSA membranes with different equivalent weights (EWs) and membrane orientations were investigated, and fatigue crack evolution was tracked in situ using four‐dimensional x‐ray computed tomography. The results show that fatigue crack in the CCM follows a sequential evolutionary process, in which catalyst‐layer cracks initiate first and membrane cracks propagate subsequently. Membrane EW and orientation affect humidity‐cycling‐induced fatigue damage by regulating swelling‐induced deformation mismatch, in‐plane anisotropy, and crack‐growth resistance. Lower‐EW membranes exhibit larger dimensional changes and lower crack‐growth resistance, making them more susceptible to fatigue crack growth. When the direction of greater membrane swelling coincides with stronger flow‐field constraints, cracks preferentially propagate approximately parallel to the flow channels and are more likely to develop into through‐thickness fatigue cracks. These findings clarify the mechanisms governing the mechanical durability of short‐side‐chain PFSA CCMs and provide guidance for membrane material design and durability optimization.

Read at publisher →