The management of axial forces is an important issue when a joining method that takes into account the axial forces generated by tightening bolts is applied to the bolted joints of a wooden structure during construction. This study focuses on elastic interactions in which the axial force of adjacent bolts changes as a result of sequential tightening of each bolt in multiple bolted joints affecting the deformation around each of the other bolts. To this end, tightening experiments are conducted within the elastic range, with the tightening sequence, bolt spacing, and wood thickness set as parameters. From the results, it was found that variations in axial force tended to decrease as bolt spacing increases. In addition, an evaluation formula for calculating fluctuations in axial force due to elastic interactions was derived. By comparing the calculated value to the experimental value, it was found that as bolt spacing was increased, the calculated value tended to capture the experimental values well.
Matsubara, Doppo, Teranishi, Masaki, Wakashima, & Yoshiaki (2022). Elastic interaction in multiple bolted timber joints. Journal of Wood Science. https://doi.org/10.1186/s10086-022-02060-3
Matsubara, et al. “Elastic interaction in multiple bolted timber joints.” Journal of Wood Science, 2022. doi:10.1186/s10086-022-02060-3.
@article{Matsubara2022,
title = {Elastic interaction in multiple bolted timber joints},
author = {Matsubara and Doppo and Teranishi and Masaki and Wakashima and Yoshiaki},
journal = {Journal of Wood Science},
year = {2022},
doi = {10.1186/s10086-022-02060-3},
url = {http://link.springer.com/openurl/fulltext?id=doi:10.1186/s10086-022-02060-3}
}
A kris is a traditional dagger that originated in Indonesia. A kris is distinguished by its asymmetrical blade, which has layers of different metals bonded on its surface. Wood is the main material used to make the kris sheath. To...
In this study, with data obtained from a particleboard factory, screw withdrawal strength (SWS) values of particleboards were estimated using artificial neural networks (ANNs). Predictive control charts were also created. A total of...
Japanese cedar, Cryptomeria japonica, is an evergreen conifer native to Japan and is often used as a building material. The humidity control properties of wood are known, but there have been few detailed analyses of its effects on...
To study the propagation characteristics of acoustic emission signals in Zelkova schneideriana under different boundary conditions, three types of boundary conditions were generated by applying aluminum plates and sound-absorbing cotton...
Particle gluing operating parameters in particleboard (PB) production have an important influence on the mechanical properties of PBs. This study developed a multi-objective optimization model based on support vector regression (SVR)...