Selective purification of paclitaxel via polarity-modulated fractional precipitation and loading capacity optimization

Journal of Chemical Sciences · Springer Nature · 2026-10-30 · DOI: 10.1007/s12257-026-00342-x

Аннотация

This study investigated the effects of solvent polarity and crude paclitaxel loading concentration on the precipitation behavior of paclitaxel in a glass bead-assisted anti-solvent fractional precipitation process, thereby optimizing selective purification efficiency and loading capacity. As the polarity index (PI) of the mixed solvent increased with the addition of distilled water as an anti-solvent, the Hansen distance between paclitaxel and the solvent increased, resulting in decreased affinity. This thermodynamic reduction in affinity acted as a driving force to elevate supersaturation in the solution, continuously enhancing the yield and partition coefficient of paclitaxel. However, the purity and selectivity reached their maximum values at a PI of 6.987. Furthermore, as the crude paclitaxel loading concentration increased, the optimal surface area per working volume (S/V) required also increased, while the time to achieve a 90% yield was significantly shortened. Nevertheless, excessively high loading concentrations induced a burst of nucleation and the formation of fine particles due to rapid supersaturation. The resulting increase in the co-precipitation of impurities caused a degradation in final purity. In conclusion, comprehensively considering the yield, purity, precipitation kinetics, and loading capacity, the optimal conditions for this process were determined to be a PI of 6.987 and a crude paclitaxel loading concentration of 16 mg/mL.

Читать у издателя →

Похожие статьи