The Strouhal Number in Jet Systems That Generate a Tone
Аннотация
Abstract— The article presents the results of an experimental study of tone generation using nozzle–jet and nozzle–jet–orifice systems. The aim of the study is to refine the calculation of pressure fluctuation excitation in a jet-driven Helmholtz oscillator. The jet systems utilized cylindrical nozzles of varying relative lengths, as well as quarter-circle nozzles with an identically rounded inlet section along a circular arc, conjugate with a sharp-edged cylindrical outlet section. In the nozzle–jet system, a free air jet flowed unimpeded into a submerged space. In the nozzle–jet–orifice system, the free jet entered an orifice in a flat wall located at a certain distance from the nozzle exit. The average jet velocity was calculated from the pressure drop across the nozzle, and the amplitude and frequency of the generated pressure fluctuations were measured with a microphone. The ranges of relative nozzle lengths and Reynolds numbers within which a free jet generates a tone were determined. It is shown that in a system with a cylindrical nozzle, a tone occurs only at a certain duct length, and only a single harmonic is always observed in the spectrum. In a system with a profiled nozzle, no tone is observed in the absence of an obstacle. It is revealed that in the presence of a second plate with an orifice, the amplitude of pressure fluctuations increases significantly, and several harmonics are simultaneously present in the spectrum with a profiled nozzle. The validity of two theoretical models of jet tone generation is considered: Krüger’s model (for a nozzle–jet–orifice system with feedback) and Mordasov’s model (for a nozzle–jet system without feedback). For both jet systems, characteristic geometric dimensions are determined that ensure self-similarity in terms of the Strouhal number over a wide range of flow regime variations.