Radio Science Electrical and Electronic Engineering
Effects of Additional Ionization From a High‐Altitude Nuclear Explosion on High Frequency Multipath Propagation and Link Availability
Abstract
Abstract The additional‐ionization environment induced by a high‐altitude nuclear explosion (HANE) substantially alters the ionospheric electron density distribution, thereby disturbing the radio propagation channel and directly degrading the quality of high frequency (HF) communication links. This study investigates the propagation characteristics and communication availability of a representative single‐hop, point‐to‐point HF link in an additional‐ionization environment 5 min after a HANE. An additional‐ionization environment is constructed by superposing HANE‐induced ionization onto the International Reference Ionosphere 2020 (IRI‐2020) natural ionosphere. Three‐dimensional magnetoionic point‐to‐point ray tracing is used to perform frequency sweeps and identify geometrically accessible paths and multipath structures. Link‐budget calculations are further integrated with signal‐to‐noise ratio (SNR) and bit‐error rate (BER) evaluations to establish a three‐tier framework consisting of geometrical accessibility, analog‐link availability, and digital‐link availability. The results show that additional ionization substantially contracts the frequency bands available for HF communication. For the prescribed link configuration, the available bands are restricted to 3.6–7.8 MHz for the ordinary (O) mode and 4.4–8.0 MHz for the extraordinary (X) mode. Although some high frequency paths exhibit geometrically resolvable multipath, enhanced absorption reduces the received SNR below the communication availability threshold.