Optimisation of post-curing process for accelerator-free carboxylate nitrile butadiene latex films
Аннотация
The global demand for medical and healthcare rubber gloves has risen substantially due to hygiene awareness. However, conventional sulphur-crosslinked carboxylated nitrile butadiene rubber (XNBR) gloves often contain allergens which are caused by accelerators, thus posing health risks, particularly Type IV hypersensitivity. This study evaluates polycarbodiimide (PCDI) as a crosslinker to produce accelerator-free gloves, in addition to optimising curing and post-curing parameters to improve the mechanical properties while reducing the allergic reaction. The optimum conditions of XNBR latex films are subjected to post-curing processes including leaching and ageing. Mechanical properties were evaluated through tensile, tear and swelling tests. Results show that the mechanical properties of PCDI-XNBR latex films have exceeded the minimum requirement of the ASTM D6319 standards. The results were concluded with optimum conditions: 90 °C for 10 min (Compound A), 110 °C for 14 min (Compound B), 110 °C for 14 min (Compound C), and 90 °C for 18 min (Compound D). Post-leaching from 60 to 70 °C improved the mechanical properties of XNBR latex films, with wet gel performing better than dry gel due to efficient removal of non-rubber particles. PCDI-XNBR is also thermally stable due to the high crosslink density from the ageing process. As a result, PCDI-XNBR latex films offered a hypoallergenic alternative with sufficient mechanical performance and met the industry standards. This study emphasises efficient and low-temperature curing to reduce the cost and environmental impact without affecting the mechanical performance.