Chalcogen bonding and pi stacking drive selective adsorption of organic compounds from petroleum refinery streams by a hybrid nickel oxide and graphene oxide catalyst

Molecular Biotechnology · Springer Nature · 2026-11-19 · DOI: 10.1007/s43938-026-00162-8

Аннотация

The removal of S-containing organic impurities remains crucial in petroleum refineries because they can damage catalysts used in refining processes. Additionally, removing similar S-containing organic compounds from petroleum refinery streams helps comply with environmental regulations and reduces catalyst poisoning during refining. In this work, we prepared a hybrid nickel oxide/graphene oxide (NiO/GO) adsorbent by the sol–gel method and evaluated it for extracting several S-containing compounds. The synthesized adsorbent exhibited a porous structure with a specific surface area of 146.48 m² g − 1 , an average pore diameter of 4.2 nm, and a NiO crystallite size of approximately 17.47 nm. DFT simulations, incorporating experimental adsorbent characterization data, were performed to investigate the adsorption of organosulfur compounds on NiO/GO surfaces. The effect of solvent was assessed based on the COSMO method, where n-hexane was the reaction medium. From the results obtained, it is evident that aromatic sulfur compounds have a greater affinity for NiO/GO surfaces compared to aliphatic sulfur compounds. In the tested species, diphenyl disulfide and diphenyl sulfide had the highest affinity towards the surface of the adsorbent, where they possessed equilibrium constants of 902.99 and 167.63, respectively, at 25 °C. From the Raman spectroscopy analysis, there was a decrease in the ID/IG ratio from 1.06 for GO to 0.82 for NiO/GO, indicating changes in the structure of the GO due to the presence of NiO. It is therefore suggested that the adsorption process is due to the π–π interaction and chalcogen bonding between the sulfur-containing molecules and the NiO/GO surface. Graphical Abstract

Читать у издателя →

Похожие статьи