Influence mechanisms of moisture content and cutting parameters on cutting force, surface roughness, and tool wear in natural rubber tapping process
Аннотация
This study systematically investigates the optimisation of tool design and cutting parameters for natural rubberwood tapping. Simulated experiments were conducted on wood blocks with varying moisture contents using a rotary bird-beak knife and a V-shaped knife. Results demonstrated that increased moisture content significantly reduced the cutting force by 30%–50%, primarily due to its lubricating effect. The rotary knife achieved minimal and highly stable cutting forces at an optimal combination of 1000 rpm rotational speed and 5 mm/s feed rate. In contrast, the V-shaped knife generated substantially higher and feed-dependent cutting forces; a feed rate of 10 mm/s provided the best balance for surface quality in this case. Although increased feed rates and higher moisture content generally led to elevated surface roughness, the rotary knife consistently produced a superior surface finish, with 15%–25% lower roughness values compared to the V-shaped tool. This smoother surface minimises cambium damage, promotes faster bark regeneration, and reduces the risk of tapping panel dryness. Furthermore, tool wear mechanisms differed significantly: adhesive wear was dominant for the rotary knife, while abrasive wear characterised the V-shaped push knife. These comprehensive findings provide crucial insights and practical guidelines for the selection and operational optimisation of tools in rubberwood tapping processes, ultimately aiming to enhance machining efficiency and final product quality.