Exploring the effect of TMTD accelerator on cross-link density in EPDM rubber
Аннотация
Synthetic rubber Ethylene Propylene Diene Monomer (EPDM) is extensively utilised throughout multiple sectors, especially for applications including seals, gaskets, hoses, and O-rings that directly interact with liquids. One of the challenges in using EPDM is improving its impermeability-related properties, which can be achieved by reducing the free volume within the material. This can be done by increasing the cross-link density, which is influenced by several factors, including the use of accelerators. This study aims to evaluate the effect of varying accelerator concentrations on the cross-link density of EPDM. Accelerators were added in different amounts: 0.6 phr ( per hundred rubber ), 1.2 phr, 1.8 phr, and 2.4 phr. The variations were analysed through rheology tests, tensile tests, cross-link density tests, and swelling tests. The findings indicate that the incorporation of accelerators markedly influenced the rheological properties of EPDM, with increased accelerator levels necessitating greater torque during processing. Tensile, cross-link density, and swelling tests indicated that the optimal accelerator concentration for achieving the best cross-link density and performance was 1.8 phr. Further increases in accelerator concentration did not necessarily lead to higher cross-link density, indicating that a higher accelerator concentration does not always guarantee better cross-linking results.