Advanced Sustainable Systems Возобновляемая энергетика, устойчивое развитие и окружающая среда
Synergistic Cyano–Fluorine Engineering in a Fluorinated Acrylonitrile Copolymer Binder for Stable High‑Voltage LiCoO 2 Cathodes
Аннотация
ABSTRACT The escalating demand for high‐energy‐density lithium‐ion batteries necessitates cathode materials capable of stable operation at elevated voltages, yet the widespread adoption of LiCoO 2 (LCO) at ≥ 4.6 V is severely hampered by structural degradation and parasitic interfacial reactions. Here, we report a rationally designed series of fluorinated acrylonitrile copolymers (A9F1) synthesized via miniemulsion polymerization, in which the proportions of cyano, ester, and fluorinated side‑chain groups are systematically tuned. The A9F1 binder, with a balanced composition, concurrently delivers adequate adhesion (peel strength of 4.17 N cm −1 ), superior hydrophobicity (water contact angle of 125°), and excellent electrolyte compatibility (swelling ratio of 26.32%). More importantly, the electron‑withdrawing fluorinated moieties raise the electrode‐level oxidative stability to 4.73 V, while the cyano and ester groups synergistically facilitate rapid Li + transport and foster the formation of a thin, LiF‑rich cathode electrolyte interphase (CEI). As a result, LCO||Li half‑cells with A9F1 retain 88.23% capacity after 250 cycles at 1 C under 4.6 V, and high‑loading electrodes (≈12 mg cm −2 ) achieve 82.99% retention over 200 cycles. In practical LCO||graphite full cells, A9F1 delivers an 88.53% capacity retention after 300 cycles, far surpassing the 60.14% of PVDF.