Effect of food‐simulating liquids on Martens parameters of denture base resins with different manufacturing techniques

Abdulaziz Alhotan, Ahmed Altarazi, Shaymaa Mudhaffer, Hanan Al‐Johani, Nick Silikas
Journal of Prosthodontics · Wiley · 2026-11-18 · DOI: 10.1111/jopr.70275

Аннотация

Abstract Purpose The purpose of this in vitro study was to evaluate the effects of food‐simulating liquids (FSLs) on Martens parameters of heat‐polymerized (HP), subtractively manufactured (SM), and additively manufactured (AM) denture base resins after different aging periods. Materials and Methods Three denture base resins, HP (Lucitone 199), SM (G‐CAM), and AM (Denturetec), were tested. Specimens (Ø10 × 2 mm, n = 5) were immersed in artificial saliva, citric acid, or ethanol at 37°C for 24 ( T 24 ) and 168 h ( T 168 ). Martens hardness ( H M ), indentation modulus ( E IT ), indentation depth ( I D ), and indentation creep ( C IT ) were measured using instrumented indentation testing. Baseline data analysis was done with one‐way ANOVA, and a generalized linear model was used for analysis at T 24 and T 168 ( α = 0.05). Results Material type, FSL type, and time point significantly affected all Martens parameters ( p < 0.001). SM resins exhibited the highest H M and E IT ( p < 0.001). AM resins showed the lowest baseline H M and highest baseline I D ( p ≤ 0.003). Ethanol significantly reduced H M and E IT at T 168 ( p ≤ 0.001). HP resins aged in ethanol had the greatest I D and C IT at T 168 ( p < 0.001). Conclusions SM resins exhibited superior resistance to indentation when exposed to FSLs. Ethanol caused significant degradation in Martens parameters of HP resins.

Читать у издателя →

Похожие статьи