Advanced Electronic Materials Электронные, оптические и магнитные материалы
Electron Scattering at PtCoO 2 and PdCoO 2 Surfaces for Interconnects <10 nm
Аннотация
ABSTRACT The resistivity increase of copper at the nanoscale due to diffuse electron surface scattering imposes a critical bottleneck for semiconductor technology nodes with <10 nm interconnect half‐pitch. Metallic delafossite oxides PtCoO 2 and PdCoO 2 are promising interconnect candidates with bulk in‐plane resistivities of 2.1 and 2.6 µΩ·cm, respectively, and quasi‐2D cylindrical Fermi surfaces that intrinsically suppress electron‐surface scattering. Electron scattering at PtCoO 2 (0001) and PdCoO 2 (0001) surfaces capped with Si and SiO x layers is quantified using in situ transport measurements on d = 3.1–28.4 nm thick epitaxial films. Si caps increase the delafossite sheet resistance proportional to 1/ d , consistent with an additive surface scattering contribution that is attributed to localized interface states. Subsequent oxidation of the Si cap to SiO x reduces the sheet resistance in all samples, suggesting partial recovery of specularity due to passivation of interface states upon oxidation. A new benchmark quantity, the specific surface scattering resistance R s , is used to compare the promise of delafossite conductors to competing interconnect materials including Cu, Co, and Ru. The results indicate that PtCoO 2 in direct contact with SiO x is particularly promising. Its R s = 1.30 × 10 −16 Ω·m 2 is lower than that of any elemental metal, indicating the potential for liner‐free all‐oxide interconnect architectures.